Accurev Command Line Tutorial For Mac

These key combinations apply only to Mac computers with an Intel processor.

To use any of these key combinations, press and hold the keys immediately after pressing the power button to turn on your Mac, or after your Mac begins to restart. Keep holding until the described behavior occurs.

• Command (⌘)-R: Start up from the built-in macOS Recovery system. Or use Option-Command-R or Shift-Option-Command-R to start up from macOS Recovery over the Internet. macOS Recovery installs different versions of macOS, depending on the key combination you use while starting up. If your Mac is using a firmware password, you're prompted to enter the password.
  
• Option (⌥) or Alt: Start up to Startup Manager, which allows you to choose other available startup disks or volumes. If your Mac is using a firmware password, you're prompted to enter the password.
  
• Option-Command-P-R:Reset NVRAM or PRAM. If your Mac is using a firmware password, it ignores this key combination or starts up from macOS Recovery.
• Shift (⇧): Start up in safe mode. Disabled when using a firmware password.
• D: Start up to the Apple Diagnostics utility. Or use Option-Dto start up to this utility over the Internet. Disabled when using a firmware password.
• N: Start up from a NetBoot server, if your Mac supports network startup volumes. To use the default boot image on the server, hold down Option-N instead. Disabled when using a firmware password.
• Command-S: Start up in single-user mode. Disabled in macOS Mojave or later, or when using a firmware password.
• T: Start up in target disk mode. Disabled when using a firmware password.
• Command-V: Start up in verbose mode. Disabled when using a firmware password.
• Eject (⏏) or F12 or mouse button or trackpad button: Eject removable media, such as an optical disc. Disabled when using a firmware password.

A tutorial on how to start using your Mac OS X command line. Thank you for watching!! Please subscribe to get updates on new videos:) ls: list file ls -l. You can use similar command with rm / accurev pop to force refetch from backend. You can also vary the flags, -m for modified, -k for kept, -a for all.

This tutorial will teach you a little of the history of the command line, then walk you through some practical excercises to become familiar with a few basic commands and concepts. We'll assume no prior knowledge, but by the end we hope you'll feel a bit more comfortable the next time you're faced with some instructions that begin 'Open. Commands or command parameters that you might type, along with other text that normally appears in a Terminal window, are shown in this font. For example, You can use the doit command to get things done. When a command is shown on a line by itself as you might type it in a Terminal window, it follows a dollar sign that represents the shell prompt.

If a key combination doesn't work

If a key combination doesn't work at startup, one of these these solutions might help:

• Press and hold all keys in the combination together, not one at a time.
• Shut down your Mac. Then press the power button to turn on your Mac. Then press and hold the keys as your Mac starts up.
• Wait a few seconds before pressing the keys, to give your Mac more time to recognize the keyboard as it starts up. Some keyboards have a light that flashes briefly at startup, indicating that the keyboard is recognized and ready for use.
• If you're using a wireless keyboard, plug it into your Mac, if possible. Or use your built-in keyboard or a wired keyboard. If you're using a keyboard made for a PC, such as a keyboard with a Windows logo, try a keyboard made for Mac.
• If you're using Boot Camp to start up from Microsoft Windows, set Startup Disk preferences to start up from macOS instead. Then shut down or restart and try again.

Remember that some key combinations are disabled when your Mac is using a firmware password. Lagu stinky mp3 gratis.

Learn more

• Learn what to do if your Mac doesn't turn on.
• Learn about Mac keyboard shortcuts that you can use after your Mac has started up.

I am trying to get a CLI command for 'revert to basis' of all the overlapping dll's in my workspace.

1. Which command should I use for this - purge or revert ?

2. I want to do this action only for overlapped dll files in my workspace. What is the best approach?

1. Purge

2. Get a list of all the overlap files. Run the command 'accurev stat -o -ffl > list.txt'

Then run the command 'accurev purge -l list.txt'

GO support for building CLI tools using native system shell [closed]

shell,go,command-line-interface

GO support for building CLI tools using native system shell [closed]

shell,go,command-line-interface

curl has an interesting implementation in Go with astaxie/bat Go implemented CLI cURL-like tool for humans. Bat can be used for testing, debugging, and generally interacting with HTTP servers. That means you needs to implement your REST server in order for any curl-like tool to interact with it. See for..

Building C# code in VSCode on Mac

c#,osx,xamarin,command-line-interface,vscode

You can setup a build task to compile the modified source. See https://code.visualstudio.com/Docs/tasks or http://blog.denouter.net/2015/04/compile-visual-studio-solution-in.html

How to get the changes from other person's workspace in Accurev?

You can do this a few ways. By file: For each file you want, in your workspace, select the file -> open the 'version browser' -> select the version of the file from the other workspace -> right click -> You can either 'Send to Workspace', Patch or Merge. By..

Making a neat, installable Python library with Click

python,click,command-line-interface,setuptools

If you've followed the Setuptools Integration steps in the article you linked to, you're most of the way there. Try installing the package as if it came from pip (maybe in a different virtualenv): $ virtualenv deploy $ source deploy/bin/activate $ pip install . Then you can invoke your command..

how to use .include? in Ruby with a hash statement

ruby,command-line-interface

It looks like you're calling include? on a string. This will only return true if you pass it a substring of itself. For example: 'Mario'.include?('Mar') #=> true You want to call include? on the array of keys in the name hash. You could do: name.values.include?(character) or more concisely name.has_value?(character) Here's..

Create a Black Jack game with a command line Interface

java,command-line-interface,blackjack

I think the meaning of 'command line interface' here is a mixture of command line arguments and reading from System.in and writing to System.out. ie the user can interface with the program through a command line terminal or window. Furthermore it probably implies that the user issues commands through that..

Java program with referenced libraries: NoClassDefFound [duplicate]

java,jar,terminal,classpath,command-line-interface

you need to tell JVM where to look for classes while running the program. the parameter that we use to tell jvm that is known as classpath there are different ways to achieve that Recomended Add the classpath location to the run command , alternatively pass the jar locations, assuming..

How can I pass the result of a command to another command in one line?

bash,shell,command-line,concatenation,command-line-interface

Assuming that the number of minutes should be an integer rather than a string: my_cli --json '{'minutes' : '$(( ( ( $(date +%s) - 18000 ) % 86400 ) / 60 ))' }' ..

cURL live output CLI

curl,output,command-line-interface

Geoserver 2.8.1 for mac. Perhaps curl's -N / --no-buffer option will help you?

Remove e-mail string from the beginning of each row in a file

linux,shell,command-line-interface,cut

You can use sed: sed 's/^[^[:blank:]@][email protected][^[:blank:]]+[[:blank:]]*//' file > file.out some string with no set width another string yet another string!! shortstring gnu sed will work with this: sed 's/^[^[email protected]][email protected]S+s*//' file > file.out ..

Start a process in background, do a task, then kill the process in the background

bash,command-line-interface

When the script is excecuted a new shell instance is created. Which means that the jobs in the new script would not list any jobs running in the parent shell. Since the selenium-server server is the only background process that is created in the new script it can be killed..

Export database from a remote server into a specific folder on my computer

php,mysql,database,shell,command-line-interface

You can run mysqldump -h yourhostname -u youruser -p yourdatabasename > C:yourfilepath.sql -h connects you to the remote servers IP so you can dump the data locally, as long as your user has the correct privileges and you can connect remotely to your database server. However, you may need to..

Script to copy and rename file fails on Mac OS X

osx,bash,command-line-interface,provisioning-profile

When using the cp command in Bash you need to provide the full path of the files. Aliases such as ~/myFolder won't work. You will need to provide a full path such as /Uers/Me/myFolder.

cordova run android executes fine. But Android 4.1.2 doesn't start the app

android,cordova,android-emulator,command-line-interface

I met the same problem (Cordova 'hello world' app won't display) and found a way to pass through it (but I don't really understand the underlying causes). Problem seemed to occur when installing the apk. On Cordova 5.0.0, adb commands to install the apk can be found at line 101..

Shell function command with quotes

bash,shell,command-line-interface,zsh

You want '$*' not '[email protected]' because you want the arguments expanded as a single word not multiple words. This is one of the few times the '$*' expansion is actually desirable. It generally isn't..

Git for Windows equivalent for open current directory command

git,shell,command-line-interface,git-bash

Lets say I have a file called index.html and from the command line I want to use a command that would pull up this file up in sublime text which is my default text editor. How would I do that? Simply define an alias (if you are in a..

argparse optional value for argument

python,python-3.x,command-line-interface,argparse

You can do this with nargs='?': One argument will be consumed from the command line if possible, and produced as a single item. If no command-line argument is present, the value from default will be produced. Note that for optional arguments, there is an additional case - the option string..

How -s option works actually in gcc compilers?

gcc,g++,command-line-interface

On Linux systems, gcc -s probably invokes the strip(1) utility (which remove most symbols from ELF files) from binutils. You could check by running gcc -v -s. To lower the executable size, you should also compile with -Os (in addition of -s) which asks the compiler to optimize for size..

amazon EC2 command line interface not returning all my snapshots

amazon-web-services,amazon-ec2,command-line-interface

Here's an alternative, using the AWS Tools for PowerShell. This utility should already be installed if your Windows EC2 is based off of an AMI that Amazon provided. This example describes a collection of snapshots that you created, and is filtered by status 'completed' and by your provided volumeId. It..

Accurev Command Line Tutorial For Mac Windows 10

How to action a command from a PHP script in the current CLI context?

php,command-line-interface

Accurev Command Line Tutorial For Machine Learning

The escape code ^[]50;ClearScrollback^G itself is described in Proprietary Escape Codes iTerm2 documentation. A quick comment on notation: in this document, ^[ means 'Escape' (hex code 0x1b) and ^G means 'bel' (hex code 0x07). You can use PHP chr() function, e.g. php -r 'echo chr(27) . ']50;ClearScrollback' . chr(7);' The..

Execute code after script abort on CLI

php,command-line-interface

The function pcntl_signal() is the answer for the situation when the script is interrupted using Ctrl-C (and by other signals). You have to pay attention to the documentation. It says: You must use the declare() statement to specify the locations in your program where callbacks are allowed to occur for..

Adapt GO build into different OS

go,command-line-interface,cloudfoundry

Go can build from any OS to any OS. You control the OS and architecture with two environment variables, named GOOS and GOARCH. The former is the operating system, and the latter is the CPU architecture. Building for 64-bit Linux is set as: GOARCH=amd64 GOOS=linux The options for GOARCH are..

AWS CLI not working on Mac OSX Yosemite

python-2.7,amazon-web-services,pip,amazon,command-line-interface

/Library/Frameworks/Python.framework/Versions/2.7/bin will need to be in your path. In your ~/.profile file (create one if necessary) add a line like: export PATH='/Library/Frameworks/Python.framework/Versions/2.7/bin:$PATH' Open a new Terminal window and it should work..

Can't launch a program from a different directory via Pexpect

python,bash,command-line-interface,pexpect

To run an executable hw, either its parent directory should be in PATH envvar or you should provide the full path. If the path is relative (not recommended) then it is a path relative to your current working directory regardless of cwd value. If you want to run hw from..

How to display progress of another command

bash,shell,command-line-interface

What you want to do is run do_something > file.txt in the background and then monitor it. You can use the special kill signal 0 to do this. do_something > file.txt & PID=$! while kill -0 $PID 2> /dev/null do [calculate percent complete] [display percent complete] sleep 5 done ..

npm bin property is not working as expected

node.js,npm,command-line-interface

I solved the problem by adding the following line to the top of the addHeaderCli.js: #! /usr/bin/env node Now I can cal it like: addheader 'test.txt' 'my header' ..

Batch file get present working directory after cd command

windows,batch-file,cmd,command-line-interface,current-dir

If your Batch file does something like this: @echo off echo Start at: %cd% cd sub cd sub2 echo Currently at: %cd% The second echo command will show C:somedirsubsub2 for sure. However, if the %cd% is placed in a code block, that is, enclosed in parentheses (like inside an if..

Reading lines from .txt into batch file and handing into command line as arguments?

python,batch-file,command-line-interface,command-line-arguments

for /f 'usebackq tokens=* delims=' %%# in ('C:pathtodocument.txt') do ( call 'C:/path/to/script.js' %%# ) ?..

Google Cloud SQL - ERROR 2003 (HY000): Can't connect to MySQL

mysql,google-app-engine,command-line-interface,ip-address,google-cloud-sql

So for whatever reason, I was able to connect if I requested an IPv4 address (costs $0.01 an hour) and used that to connect instead of the free IPv6 address, then I could connect from anywhere. Otherwise I can only connect to my Cloud SQL when it is using the..

How can I save a user specifig config in a node module?

javascript,node.js,command-line-interface,config

You can write to a hidden file in, say, ~/.mycliconfig and the just read the file synchronously try{ var userData = fs.readFileSync(process.env.HOME + '/.mycliconfig'); } catch(e){ if (e.code 'ENOENT') { console.log('File not found!'); } else { throw e; } } If you need to save more stuff you can..

how does apache commons-cli parses t character

shell,command-line,command-line-interface,backslash,apache-commons-cli

As you are trying to provide this when invoking the application in the shell, this is actually related to how the shell handles such special characters, not commons-cli or Java. The bash shell (which is the default shell on most unix/linux versions nowadays) has the special syntax $'t' for this,..

How do I create a node.js command line utility that uses gulp

node.js,command-line-interface,gulp

Gulpfiles are just node apps. You can require them in your node app like any module: var gulpfile = require('./gulpfile.js'); Then you can invoke a gulp task that was defined in the gulpfile: gulp.start('someTask'); Note that .start() will be deprecated in gulp 4.0 Putting that all together, it would look..

C# - Converting String array to sbyte** (String[] to sbyte**)

c#,arrays,pointers,clr,command-line-interface

it solved by: sbyte[][] sbytes = new sbyte[6][]; for (int argCounter = 0; argCounter < 6 ; argCounter++) { get the byte array byte[] bytes = Encoding.ASCII.GetBytes(argument[argCounter]); convert it to sbyte array1 sbytes[argCounter] = new sbyte[bytes.Length]; for (int i = 0; i < bytes.Length; i++) sbytes[argCounter][i] = (sbyte)bytes[i]; } unsafe..

Stop Java Process if Running in Raspbian

java,command-line-interface,raspbian,application-shutdown

If you prefer a one-liner JPID=$(jps -m | grep NameOfTheMainClass | awk '{print $1}') && [ -z '$JPID' ] || kill $JPID ..

c++ 2 ref classes should have acess to one same object of a other class

c++,windows,reference,system,command-line-interface

If your class of c is a ref class, you can use ^ (handle) to reference it. like the code here ref_class_c ^ d(gcnew ref_class_c); ref_class ^ e = d; As for the tracking reference versus a handle, the difference is similar to a reference/out parameter in C# method versus..

What are the different ways of submitting Hadoop jobs?

command-line-interface,oozie,hadoop2

What does Hadoop jobs mean ? MapReduce : CLI + Oozie Spark : spark-shell + Java / Pyton / Scala + Spark Job Server (Rest) + Oozie Hive : CLI + Java - Thrift(JDBC) + Oozie Pig : CLI + Java + Oozie etc .... If you want to use..

Debugging Node.JS CLI application with VSCode?

node.js,debugging,command-line-interface,xubuntu,vscode

On Linux Visual Studio Code does not yet open a terminal for the program to be debugged, so there is no way to interact with it through the command line. As a workaround you can launch the node program from a terminal in debug mode and attach to it from..

Weird behaviour of cURL request in PHP script

php,apache,curl,browser,command-line-interface

Have you tried logging verbose output for the Curl request? Normally I find this the best way to figure out what's going on under the hood..http://stackoverflow.com/a/14436877/682754 Also not as popular but this approach looks simple to implement and is a lot cleaner..http://stackoverflow.com/a/26611776/682754..

How to use the --verbose flag in the MySQL 5.6 command line client?

mysql,command-line-interface

Adobe Acrobat Pro DC 2020 Activation Code/Serial Number April 14, 2020 Adobe Acrobat Pro DC is the popular Adobe software for reading and editing PDF files, you can download Acrobat Pro DC. There is no need to use Acrobat Pro DC Keygen as you can convert files using PDFMate. The program has a great set of tools. With PDFMate, it is possible to convert PDFs to text, Word, JPG, EPUB, HTML, and SWF file formats in Mac OS. Besides, the program features Optical Character Recognition, which allows you to convert scanned PDFs. Keygen adobe acrobat pro dc for mac.

The correct syntax for a verbose interactive session is: c:> mysql -u yourUser -p -v yourDatabase This will launch an interactive session (prompting you for password), and set yourDatabase as the default database for the session. Once in this interactive session, issue a tee command: mysql> tee c:/temp/my.out And now..

How can I read iso-8859-1 file

linux,centos,command-line-interface

The file is not ISO-8859-1. That would be Western Europe. Instead, it looks like one of the Cyrillic flavors (for example ISO-8859-5). Here is a screenshot showing the file before converting it: You would probably not like the result transliterated into ASCII. I recommend converting it to UTF-8, e.g., iconv..

How can I run grunt as a daemon?

node.js,gruntjs,command-line-interface,daemon,epub

Here's the solution I found: As was suggested above, using pm2 However, when I ran pm2 start grunt I got an error saying that the grunt module did not exist, which was weird. So I ended up writing a script which worked: -- start.js -- var pm2 = require('pm2'); pm2.connect(function()..

CF CLI features that are enabled in Bluemix

command-line-interface,bluemix

Unfortunately it is not documented which features of the Cloud Foundry CLI are implemented in Bluemix and which ones are not - other than what is documented here. Some features, such as deleting organizations, can affect multiple things such as billing so that has to be done through support tickets..

Terminating python for loop program in the command line without closing it?

python,command-line-interface

Generally I find that Ctrl+c does the job. It's a keyboard interrupt that should halt most python activity in the interpreter/terminal on both windows and linux

Spring Shell - usage and execution

java,spring,spring-boot,command-line-interface,spring-shell

That comment in the documentation is a bit misleading (I'll change it). For your components to be picked up, they need to be on the classpath AND you'll need to scan for them somehow. See for example how in the Spring XD project, there is a scan for the org.springframework.xd.shell..

Install role services using command line

powershell,command-line-interface,windows-server-2012

Install-WindowsFeature –Name feature_name -ComputerName computer_name -Restart

Asterisk CLI - reset scrollback

command-line-interface,asterisk,elastix

No, not possible. But you can write your own tool and change behavour whatever you need. For call-specific info you can check CEL or CDR..

Commons CLI is not honoring my command line setup

java,command-line-interface,apache-commons-cli

First the .hasArg() on your OptionBuilder tells it that you expect an argument after the paramter flag. I got it to work with this command line --fizz 'VicFizz is good for you' -b 'VicBuzz is also good for you' Using the following code - I put this in the constructor..

How to pass a hash as optional argument to -M in command line

perl,hash,package,command-line-interface

Looking at perlrun use: perl -Mfeature=say '-Mconstant {c1 => 'foo', c2 => 'bar'}' -e'say c1,c2' ..

Accurev Command Line Tutorial For Macbook Pro

Can't execute exec command (php / windows / ffmpeg)

php,windows,ffmpeg,exec,command-line-interface

I had ffmpeg after ffmpeg.exe - that's why it didn't work. $cmd = 'C:wampwwwffmpegbinffmpeg.exe -i tmp1.flv -c:a copy -vf drawbox=:x=0:y=0:color=invert:t=2 output2.flv 2>&1'; exec($cmd, $output) ..

ZF Error ZF tool setup

zend-framework,command-line-interface

I ended up using Zend Framework 1 final release - version 1.12.11 to get around this headache and it worked perfectlt as it should have. Had to be a bug in the 1.9 version!